Our PRP sear for the Springfield Echelon is made out of 440 C stainless steel and properly heat treated. Its geometry is designed to lighten as well as help smooth out your trigger pull. It is compatible with our trigger kit, our spring kit, or as a standalone item.
Made in the USA.
WARNING: This product can expose you to chemicals including lead, which is known to the state of CA to cause cancer, birth defects or other reproductive harm. www.P65Warnings.ca.gov
3 Reviews Hide Reviews Show Reviews
-
Absolute Game Changer!
This sear along with the trigger kit produces a light, crisp trigger pull. Greatly reduces trigger pre-travel and reset. The installation video provided by PRP was a life saver when it came to reassembling the sear/hammer assemblies with the springs. If you want your gun to shoot Lights-Out, this is the kit for you.
-
Powder River Sear
I installed the Powder River sear and spring kit in the Echelon today. I'm happy with the results. The stock sear and safety sear springs seemed stiffer than necessary after polishing the related components. And I had no light primer strikes at the range. What the sear did was reduce the travel between the wall and break. They do this with different sear geometry. Originally you'd reach the wall, then creep a little before the break. Now you reach the wall, and it breaks right after that without creep. It's lightened the trigger a bit as well.
-
Echelon Sear
Cleaned up the break and slightly lowed the pull by a few ounces on the trigger pull. worth the purchase in addition to the trigger kit
