Slide milling for red dot optic mounting plate. Available on all XD models 3", 4", 5" and the 3.8"/4.5" XDM/XDM Elite models only. Includes one mounting plate and one coverplate with 3 screws for mounting the plate to the slide. Mounting plates and coverplates are compatible with factory OSP slides. Price includes refinishing the slide. Not available for XDM 5.25" models.
Many sights share the same mounting footprint. Optic mounting screws are NOT included as they vary by make and model. Below is a quick reference guide to our mounting plates and the footprints they fit.
- Plate #1 for XD/XDM (Vortex, Burris FastFire, HEX Dragonfly) threaded 6-48
- Plate #2 for XD/XDM (Leupold DeltaPoint, JPoint, Shield, HEX Wasp, Holosun 507K/407K & EPS models) threaded 4mm x .7mm
- Plate #3 for XD/XDM (Trijicon RMR & SRO, Holosun HS507C/407C & HS508T, Kingslayer Swampfox) threaded 6-32
- Plate #5 for XD/XDM Holosun 509T only
- Plate Aimpoint Acro P-1 & P-2 & Steiner MPS
Please inlcude a copy of this invoice and ship your slide to us at your convenience. Turn around time is 1-2 weeks for this service. You will receive a shipping notice with tracking information via Priority Mail, insured with signature required for return shipping when the order is complete.
Shipping Address:
Powder River Precision, Inc.
331 Industrial Drive
Clark, SD 57225
18 Reviews Hide Reviews Show Reviews
-
XD slides mill for RDS
XD45 Tactical, XD45 Compact, XD Mod.2 compact 9mm: Slides milled for RDS. Vortex Defender CCW and ST. They did an excellent job. Maintained the rear sight, maintained the loaded chamber indicator. High quality work! Double check the tork of the mounting screws and add a dab of blue loctite. Happy with the process and outcome! Solid company and great customer service.
-
Excellent craftsmanship and fast turn around
The milling work on my XDM-Elite is amazing and looks like it came from the factory ready for my red dot. It took just about two weeks from when I mailed the slide to when the slide was back in my hands. Great communication as well.
-
Slide milling
Beautiful work. Time to complete as promised. Highly recommend
-
Slide milling and red dot install with co witnessed iron sights
First I would like to say again, well done PRP” outstanding workmanship and engineering on my XD. You have taken my firearm to the next level and have exceeded all my expectations during this build , Thank you so much for your hard work and great customer service . R. Saenz
-
Slide Milling Service
Well, I have not fired it yet, but the overall impression is... it's amazing! The fit and finish is beyond top notch. I have seen other companies' work, and this is far superior. The Springfield XDm Elite is not easy to mill. It has a rise that has to accommodate a spring under the plate, and there is the loaded-chamber indicator that has to be cut around too. All of this was milled perfectly with no tool marks! You could tell, too that PRP really watches their quality control. You can tell the CNC bits were incredibly sharp... not overworn...by how crisp the edges were. The refinish of the slide is flawless! They also removed the factory sights and installed supressor-height sights to cowitness with a Holosun 507c. Fabulous job and great customer service!
-
XDM 9
I was surprised to learn that no one in the city of Houston was willing to mill a Springfield. However, a local gunsmith recommended prp so I did some internet research and discovered the reviews were extraordinary. I was hesitant to leave my side in the hands of the usps and send to the other side of the country, but from the time I dropped the package at the post office until it was back in my mailbox was 1.5 weeks. Doubtful a local gunsmith could have turned it around that quick. The work is amazing and everything perfect for my Deltapoint pro. Took it to the range this weekend for the maiden voyage and everything worked perfectly. My groups from 20 yards out were exactly what I wanted. I have since ordered a trigger kit and look forward to installing that. If it were possible for me to walk down and shake their hands I would.
-
XD slide mill
Thank you PRP. Milling was flawless
-
XDM Slide Milling
It was difficult to find someone to properly mill the slide so that my optic could be mounted. Precision lived up to their name by doing a quality job with a quick turnaround.
-
XD-XDM Slide Milling
After much research into who was doing what for an optics milling service and finally settling on which optic I wanted, Springfield Armory announced they were producing an OSP slide for the 9mm/40 XD. I was really liking what I saw as it eliminated much of my hesitation and concerns. But, SA wasn't offering an OSP cut slide for their XD45, and no one was doing an OSP cut either, then I came across the PRP website. I looked at their slide milling form and what they were doing looked very different from what I have seen other milling services offer, I was curious, so I called them. They explained their milling on an XD was an OSP cut, they didn't have to say another word, but I listened carefully waiting to hear an inadvertant flaw in the process to pop its ugly head up, but no, the OSP cut eliminated the striker retainer pin and the striker safety related issues found on an XD having the traditional milling service done. That settled it, I was all in, so I mailed my slideoff to PRP and in two weeks to the day USPS was ringing the doorbell delivering my OSP cut slide. This slide looks great! I mean Great! Best of all, I found an unadvertised side benefit, that pesky extractor that needs a special tool to remove, no more, as it is now exposed on the top when you remove the cover plate, so if you are looking to upgrade to a heaver duty extractor, you now have a second option, just use a small hammer and punch and push it down from the top, you can set aside the special tool. I cannot wait for my EOTECH EFLX to show up, it uses the Leupold Delta Point Pro footprint. So that is the mounting plate I ordered with their slide milling service, they make others too. Thank you PRP, Frank