This Ultimate Easy Fit Trigger Kit for the original XD® models in 9mm, .40 cal & .45 cal (all except thumb safety model) includes our famous Striker Safety Lever and Trigger to remove the long trigger pre-travel on the XD® trigger. A reduced power trigger and sear springs will help lower the pull weight. Our trigger is made of tough light weight polymer that helps speed up the reset. It also has an integral over travel stop on the back of the trigger. Using this method of over travel stop removes added stress on the trigger bar that are present with any of the other over travel stop method. This trigger is a Springfield Armory OEM part available on production for XD and XDM pistols from the factory (see APPENDIX D4 — 21.6 Production Division Rules).
When installed correctly, this kit will give you a short, crisp trigger pull (about 4-4.5lbs) with a fast reset and cut the total trigger pull length by about 1/2. The Ultimate Easy Fit Trigger Kit requires minor fitting and includes gunsmith installation instructions.
This Product has earned the American Pistolsmiths Guild Seal of Approval.
⚠️WARNING: This product can expose you to chemicals including lead, which is known to the state of CA to cause cancer, birth defects or other reproductive harm. www.P65Warnings.ca.gov.
Review migrated from original PRP website –
A new gun
09/11/2017
I have a PRP trigger kit on my XD 4″, and have been pleased with it. When I ordered my XD Tactical I ordered a PRP kit at the same time. When the gun arrived, I shot 200 rounds through it, then installed the new trigger kit. As with my first gun, the difference was fantastic. I’m very pleased with trigger kits on both guns. It is a superb product.
Review migrated from original PRP website –
11/20/2016
A great gun to start with but with a trigger pull to long and squishy and transforms into a smooth very easy and predictable trigger drop. This made the getting a better grouping quicker as my fingers did not like long trigger pulse. Now that it is half as long all 15 yard shots where I want them.
Very happy . Hal Hunt
Review migrated from original PRP website –
02/08/2016
I was never happy with my 9mm XD (4” service model). My groups were pretty inconsistent, and it just wasn’t fun to shoot. I had gotten to the point that I was going to sell it and get something else because I didn’t use it anymore. Well I decided to get spend the 100.00 and give the easy fit kit a try. Installation was pretty straightforward, with the only issue being the sanding down of the trigger stop. Having not done it before, I kept thinking that I was taking too much off. Long story short, I got it to the range, and what a difference! My groups are much better, and the gun is actually fun to shoot now. I didn’t realize what a difference this would make.