This PRP® Drop-In Kit fits the XD® Mod.2 4″ Service and 5″ Tactical models in all calibers. It contains our famous Striker Safety Lever and Trigger to remove the long trigger pre-travel on the XD® MOD.2 trigger with two different weight trigger springs and striker springs (the competition weight springs, the lightest weight, are marked with blue ink). The other reduced weight springs are the sear spring and the striker safety spring which helps lower the pull weight. To help speed up reset, our trigger is made of tough light weight polymer and is now also available in aluminum. It has an integral over travel stop on the back of the trigger. Using this method of over travel stop removes added stress on the trigger bar that is present with any of the other over travel stop method. The polymer trigger is a Springfield Armory OEM part available on production for XD® & XDM® pistols from the factory (see APPENDIX D4 — 21.6 Production Division Rules).
When installed correctly, this kit will give you a short, crisp trigger pull (about 3.5-4.5lbs) with a fast reset and shorten the total trigger pull length.
Not compatible with the XD® Mod.2 SubCompact models.
****Also available with optional sear upgrade (this is not a drop-in part and will need to be fitted down to the tolerances of your pistol)!!****
⚠️WARNING: This product can expose you to chemicals including lead, which is known to the state of CA to cause cancer, birth defects or other reproductive harm. www.P65Warnings.ca.gov.
| Weight | 2 oz |
|---|---|
| Dimensions | 8 × 5 × 0.5 in |
| Trigger Type | Pre-Fit Polymer Black, Pre-Fit Aluminum Black, Pre-Fit Aluminum Silver |
| Upgrade Options | PRP® Improved 7.5 Degree Sear, Standard Drop-In Kit |
1 review for PRP® Drop-In Trigger Kit for XD® Mod.2 4″ & 5″ models in 9mm & .40 cal & .45 cal
Related products
Review migrated from original PRP website –
Great Kit – Fit and Works Perfectly
08/14/2016
I had installed the PR trigger kit on my XD .40 Tactical before, and it works perfectly with about two hours of careful fitting. I just installed the “drop in” kit on my .45 XD Mod 2. Even with the optional sear, this one installed with no extra fitting at all – no file or sandpaper needed – it functions perfectly. (Follow the reset and in-process function checks on the PR videos.) Wondering if the kit just happens to fit this model “out of the box.” Also installed miscellaneous other upgrade parts (pin kit, ejector, etc) at the same time. PR’s stuff just works well. The trigger pull – all springs the blue comp ones – is precisely the as-advertised 3.5#, and reset is very nice. Glad I bought the second kit.
Well worth the time and money